We are a company that produces walking-based tempering furnaces. It is designed to perform heating before diagonal, flat or circular shafts or sheets are shaped. It carries the material at equal intervals with its specially designed movable base. This is how heat treatment is achieved.
It is possible to add sections according to the loading and unloading status of the material to be heat treated / the processes that the part needs to see later. These sections are; roller loading and unloading conveyors, spring and coil winding machines, stamping and pressing machines, quenching tanks.
General Features of Walking Base Annealing Furnace
Production can be made in special sizes and capacities depending on the wishes of the customers. Homogeneous heat distribution and high product quality are always ensured. It has low decarbunization properties with oxygen control. It has high energy efficiency. It offers various economic advantages and benefits with low maintenance costs. There are also possibilities such as automatic lubrication in loading and unloading roller systems. Their longevity is one of the reasons why they are often preferred. Specially designed water-cooled loading and unloading conveyor rollers are available. Walking-based tempering furnace, above all, has a user-friendly structure. There is a fully automatic PLC control system with access.
It is frequently used in the annealing of mainly round or angular cross-section shafts and sheets. It has a structure that can be evaluated as heat treatment furnaces. According to the request, walking-floor annealing furnace is manufactured. In addition to this, it is also possible to manufacture it as a walking beam type. It offers ease of use and maintenance. Considering this convenience, its design is provided. They are ovens that can be manufactured with gas heating. Combustors with self-recuperator or external recuperators are used. Consumption efficiency is quite high. It is possible to monitor your process with the specially designed scada system. Unlimited prescription registration is also possible. You can get reports and keep your alarm / maintenance status under control. We continue to offer comprehensive services as we are a company that can meet furnace demands up to 30 tons / hour.
How is Annealing done?
Annealing is done for the purpose of softening the metal. The name given to the general processes applied for this purpose is annealing. By annealing, the machinability of the material and its ability to form hot or cold can also increase. Internal stresses that may occur after forging or welding can also be taken in this direction. Mechanical properties can also be improved by annealing. Chemical inhomogeneity can also be eliminated in this direction. In addition, annealing performed before hardening can make the internal structure of the material more suitable for the hardening condition. The term annealing can also be evaluated as full annealing, which refers to heating and then slow cooling for the austenite phase. There are other different words used together with the word annealing.
The annealing process that we have mentioned above is also of great importance for the walking-floor annealing furnace. Therefore, it is of great importance that these processes are carried out in the best way possible. For this, it would be right to get professional support and to make an agreement with a company with high knowledge in this field.